Global Machinery Company MAG950HD - Manual (Page 3)

3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
Voltage: 230–240V ~ 50 Hz
Power input: 950W
No load speed: 0–1100min -1
Chuck type: SDS
Keyed chuck capacity: 1.5 –13mm
Impact frequency: 0– 5800 bpm
Drilling capacity:
Wood: 40mm
Steel: 13mm
Masonry: 26mm
Weight: 3.4kg
A weighted sound pressure: 92.6 dB(A)
A weighted sound power: 103.6 dB(A)
Typical weighted vibration: 8.43 m/s 2
The sound intensity level for the operator may exceed
85dB(A) and sound protection measures are necessary
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.