Gefen GEF-DVIKVM-848DL - Manual (Page 21)

18
RS-232 SERIAL CONTROL
#EDIDDSTOLO Function
The #EDIDDSTOLO function reads the downstream EDID and stores it to a Local
EDID input.
Syntax:
#EDIDDSTOLO param1 param2 [param3...param9]
Parameters:
param1
A downstream monitor [1 - 8]
param2
Input list [1 - 8]
Notes :
If param2 = 0, then the downstream EDID is stored to all 8 DVI inputs.
Examples :
#EDIDDSTOLO 2 1 2 3 4 5 inputs 1-5 use display 2 EDID
#EDIDDSTOLO 3 0 all inputs use display 3 EDID
#EDIDDSTOBA Function
The #EDIDDSTOBA function reads the downstream EDID and stores it to a
specifi ed EDID bank.
Syntax:
#EDIDDSTOBA param1 param2
Parameters:
param1 A downstream monitor [1 - 8]
param2 EDID bank offset [1 - 5]