Garmin HN294DP/DI - Manual (Page 62)

Advanced Configuration
56 EN/LZT 108 6377 R4 - September 2003
3. Select System > Save Configuration and click the Save button to
save your new settings.
To remove a client, simply click Delete in the list of approved clients.
9.6.4 WAN Configuration
On the Configuration > WAN page you can create, modify and delete
ATM PVC interfaces.
The HN294d supports ATM (Asynchronous Transfer Mode) over ADSL. To
set up connections over the WAN you have to define an ATM PVC
interface for each remote connection.
You can select an existing ATM PVC interface and click the Modify link to
edit its parameters or click the Delete link to delete it.
Create a new ATM PVC Interface
If you want to add a new ATM PVC Interface, proceed as follows:
1. Click the Create a new PVC button and the following page appears:
2. Select a Data Mode and click the Next button.
3. Depending on which Data Mode were selected different pages is
now appearing. In the example below, Data Mode “PPPoE” was