About the controlson the air purifier, About the controls on the air purifier , 4, About the controls on the air purifier – GE AFHC32AM User Manual

Page 3: Manual controls, Power on/off button, Filter reset button, Timer selector, Circulaire selector, Fan speed selector, Light sensor/night mode

Advertising
background image

Power On/Off Button

Press to turn the air purifier on and off.

Filter Reset Button

The filter reset indicator light will come
on when the filter needs to be replaced.

To reset the filter indicator after replacing
the filter, if no filter lights are on:

For the Pre-Filter, press the FILTER RESET
button once and the Pre light will flash; then
press and hold for 2 seconds. The indicator
light for the filter will go off.

For the 99.97% True HEPA Filter, press
the FILTER RESET button twice and the
HEPA light will flash; then press and hold
for 2 seconds. The indicator light for the filter
will go off.

To reset the filter indicator after replacing
the filter, if one or both lights are on:

Press and hold the FILTER RESET button
for 2 seconds. One or both indicator lights
will go off.

Timer Selector

Press to select from timer hour settings 1 hr.,
2 hr., 4 hr., 8 hr. or OFF. The air purifier will run
for the selected number of hours and then
turn off.

Circulaire Selector

Press to set the circulation grille On or Off.
When CIRCULAIRE is On, the circulation
grille will move to circulate airflow. When
CIRCULAIRE is Off, the grille will stop but
remain open. After 6 hours of operation,
the unit will automatically turn off.

Fan Speed Selector

Press to adjust the fan motor speed setting
from levels 1, 2, 3, 4, 5 and AUTO. The Fan
Speed
indicator shows the setting level
the fan is on.

In AUTO mode, the fan speed is automatically
adjusted according to the dust level of the
room. The Auto Setting indicator light will
be on when the Speed is set to AUTO.

Light Sensor/Night Mode

When the air purifier is On and set to AUTO,
the Light Sensor will detect the loss of light for
more than 3 minutes. If this happens, the unit
goes into Night Mode. When the Light Sensor
detects bright light again, normal operations
resume.

Filter reset

indicator

SPEED

TIMER

AIR

1 2

3 4

5

1h

2h

4h

8h

AUTO

CIRCULAIRE

NIGHT

POOR

GOOD

Pre-Filter

HEPA

FILTER RESET

TIMER

CIRCULAIRE

SPEED

Pre / HEPA

1-5/AUTO

LIGHT

SENSOR

AUTO

CIRCULAIRE

About the controls on the air purifier.

ge.com

Manual Controls

Circulation

indicator

Timer indicator

Fan speed

indicator

Consumer S

uppor

t

Tr

oubleshooting Tips

Operating Instructions

Safety Instructions

Car

e and Cleaning

3

Night

indicator

Auto

setting

indicator

Air quality

indicator

Advertising