GE AFHC32AM - Manual (Page 7)

7
Pull the bottom of the front cover toward you
and lift up slightly to remove.
Pull forward on the black Pre-Filter, using the pull
tabs in the middle, and remove it from the unit.
Gently pull forward on the 99.97% True HEPA
Filter to remove it from the unit. Remove the
plastic shipping cover from the filter and discard.
Replace the 99.97% True HEPA Filter in the unit.
There is a fixed gasket on the edges of the filter.
That side goes toward the back of the unit. There
is a tab on the front side of the 99.97% True
HEPA Filter that says “FRONT.”
If you are choosing to use the Charcoal Filter,
install it in the back of the Pre-Filter now. Slide
the Charcoal Filter under the tabs on the back
side of the Pre-Filter. Install with the Charcoal
Filter facing the 99.97% True HEPA Filter.
Packaging must be removed from the True HEPA Filter before using your air purifier for the first time.
Using the air purifier.
ge.com
Pull tabs
Consumer S
uppor
t
Tr
oubleshooting Tips
Operating Instructions
Safety Instructions
Car
e and Cleaning