Great Dane Surfer GSRKW2352S - Manual (Page 37)

Specifications - 35
SPECIFICATIONS
Connect Battery
c
c
1. Connect positive (red) cable to battery positive (+) terminal. Install red
terminal cover (A).
2. Connect negative (black) cable to battery negative (-) terminal. Install
black terminal cover (B).
Check Machine Safety Systems
Perform safety system check to make sure the electronic safety interlock
circuit is functioning properly.
Specifications
Engine
Note: See engine manufacturer’s owner’s manual provided with your
machine for engine specifications.
Drivetrain
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Dual Hydrostatic
Pumps . . . . . . . . . . . . . . . . . .Hydro-Gear PG-1KDA-D61 - PG-1HDA-D41
Wheel Motors . . . . . . . . . . . . . . . . . . . . . . . . . . Hydro-Gear HGD-12-7172
Number of Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infinitely Variable
Electrical System
Charging System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Amp
Ignition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flywheel
Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solenoid Shift
Fuel System
Fuel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . Gasoline, Regular Unleaded
Fuel Tank Location . . . . . . . . . . . . . . . . . . . . . . On Right Side of Operator
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6.0 gal)
Steering and Brakes
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual Control Levers
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Park Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire Contact
Tires
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 x 8.5 - 8
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 x 4 - 5
Inflation Rear (Maximum) . . . . . . . . . . . . . . . . . . 69–97 kPa (10–14 psi)
Inflation Front (Maximum) . . . . . . . . . . . . . . . . . . 138–173 kPa (20-25 psi)
Battery
Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-volt
CCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270-amp
Reserve Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 minutes
BCI Group Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U1
Capacities
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.7 L (6 gal)
Hydraulic Oil (With Filter). . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 L (3.3 qt.)
Engine Oil (With Filter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 L (2.0 qt.)
Travel Speeds at Full Engine RPM
Forward . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–14 km/h (0–8.7 mph)
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–6.4 km/h (0–4 mph)
Dimensions
Wheel Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.12 m (44 in.)
Overall Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.22 m (48 in.)
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.47 m (65.5 in.)
Overall Width (with chute up) . . . . . . . . . . . . . . . . . . . . . . . 1.35 m (53 in.)
Overall Width (with chute down) . . . . . . . . . . . . . . . . . . . 1.64 m (64.5 in.)
Recommended Lubricants
Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . See Applicable Engine Manual
Hydraulic Oil . . . . . . . . . . . . . . . . . . . . 5W-50 or 15W-50 All Synthetic Oil
Grease: (This may change for high-speed applications such as
cutting units)
. . . . . . . . . . . . . . . . All-Purpose Grease with an NLGI Grade No. 2 Rating
(Specifications and design subject to change without notice.)
Getting Quality Service
Service Literature
If you would like to order a copy of the Parts Catalog or Operator Manual
for this machine, contact your Great Dane Dealer. Parts catalogs and
operator manuals are also available online at GreatDaneMowers.com.
Parts
We recommend Great Dane quality parts available at your Great Dane
dealer.
Part numbers may change, use part numbers listed below when you order.
If a number changes, your dealer will have the latest number.
When you order parts, your Great Dane dealer needs your machine serial
number and engine serial number. These are the numbers that you
recorded in the Product Identification section of this manual.
Great Dane Quality Continues with Quality Service
Great Dane provides a process to handle your questions or problems,
should they arise, to ensure that product quality continues with your
CAUTION: Avoid injury! Prevent Battery Explosions:
• Keep sparks, lighted matches, and open flame away
from the top of battery. Battery gas can explode.
• Never check battery charge by placing a metal object
across the posts. Use a volt-meter or hydrometer.
• Do not charge a frozen battery; it may explode. Warm
battery to 16 degrees C (60 degrees F).