Goldmund MIMESIS 22 - Manual (Page 8)

8
In the center position of this switch, all tape inputs and outputs are disconnected and
the MONITOR switch is deactivated to provide the best sound accuracy.
The other positions, controlled by red Led's on the front panel are :
- PB 1 :
Connects the TAPE1 machine. To play the machine or
monitor the recording, use the MONITOR ON position.
The recording can be made simultaneously on the TAPE2
machine.
- PB 2 :
Same for the TAPE2 machine.
- COPY 1-2 :
The TAPE2 machine can record directly the
playback of the TAPE1 machine. The MONITOR switch allow to
listen to, either the TAPE1 source machine in OFF position
or the recording made by TAPE2 in ON position.
- COPY 2-1 :
Same with both machine exchanged.
- MONITOR
Allows the control after recording or during a recording session with three heads
machines.
(see above TAPE)
- ABSOLUTE PHASE
This switch reverses the polarity of the signal simultaneously on both channels. See
paragraph 8 below. To indicate that the unit is playing in opposite phase, the “180”
led is glowing.
7 - INTERNAL ADJUSTMENTS
The Goldmund Mimesis 22 preamplifier main unit provides on its main board
separate impedance and level adjustments for each input.
Those internal adjustments are provided for special source connections and can be
left for conventional use at the factory-adjusted OFF position .