Problem, Answer consumer information – GE WA5800R User Manual

Page 24

Advertising
background image

PROBLEM

(continued)

PROBLEM

POSSIBLE CAUSE

IS NOISY

Make

washer is level and

to the floor with rubber

pads in place and

front jam nuts tight. See your Instigation

A sharp, distinctive sound will be heard at

end of each spin

as the motor

stops and the spin brake inside

transmission

in.” This sound is normal.

Heavily unbalanced loads can cause the washer to vibrate excessively during spin,

and may cause it to move from its original position. In extreme cases (usually occurs
when washing a single, heavy item or a small load when water

is

than

necessary), the spin basket may strike the outer tub, creating a loud but harmless noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart.

WASHER PAUSES

CYCLE

Washer

pauses between washing

as between wash and spin or

between

spin and rinse.

If you

more

free:

GE

Answer

consumer information

24

Advertising
This manual is related to the following products: