Global Machinery Company 25CC - Manual (Page 3)

3
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Conforms to relevant standards for
electromagnetic compatibility.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear safety footwear.
Wear safety gloves.
Warning.
Read these instructions for use carefully.
Choke control
Start position (choke closed).
Run position (choke open).
Use at a distance of at least 15m from
other people.
Thrown objects and rotating line can
cause severe injury.
Replace dull blade. Do not sharpen the brush
blade. Sharpening the blade can cause the
blade to brake off while in use.
Sharp blade on the safety guard, do not touch the
cut-off knife.
Explosive material.
Extremely hot surface. Do not touch a hot muffler,
gear box or cylinder, you may get burned. These
parts get extremely hot from operation and remain
hot for a short time after the unit is turned off.
Noise label rating 85dBA
(taken at 7.5 meters) you must wear
ear protection at all times.
���������
��