Green House WGA54G - Manual (Page 12)

Wireless-G Ethernet Bridge
5. Confirm your changes to the Game Adapter’s settings from the following
screen, shown in Figure 5-20. Then, click Yes to accept these settings.
6. The following screen (shown in Figure 5-21) confirms that Advanced Setup
is complete. Later changes can be made from the Web-based Utility, as
shown in “Chapter 6: Using the Wireless-G Game Adapter’s Web-based
Utility”.
17
Instant Wireless ® Series
• You can also enter the WEP Key manually in the Key field. If you are using
64-bit WEP encryption, then the key must consist of exactly 10 hexadeci-
mal characters.
If you are using
128-bit WEP
encryption, then
the key must
consist of exact-
ly 26 hexadeci-
mal characters.
Valid hexadeci-
mal characters
are “0”-“9” and
“A”-“F”. Then,
click Next.
4. From the next screen, shown in Figure 5-19, enter the IP Settings unique to
your network. Then, click Next to continue or Back to return to the previ-
ous screen.
• IP Address - This IP address must be unique to your network.
• IP Mask - The Game Adapter’s IP Mask (also known as Subnet Mask)
must be the same as your wired network’s Subnet Mask.
• Gateway - Enter the
IP address of your
network’s Gateway.
16
Figure 5-18
Figure 5-19
Figure 5-20
Figure 5-21