Green House WGA54G - Manual (Page 13)

Wireless-G Ethernet Bridge
Chapter 6: Using the Wireless-G
Game Adapter’s Web-based Utility
The Game Adapter is designed to function properly after configuration using
the Setup Wizard. However, if you would like to change these settings or make
more advanced configuration changes, use your web browser and the Wireless-
G Game Adapter’s Web-based Utility. This chapter explains how to use the
Utility.
1. Open your web browser, and enter the Game Adapter’s IP address (the
default is 192.168.1.250). Press the Enter key, and the screen shown in
Figure 6-1 will appear. In lowercase letters, enter the default password,
admin, in the Password field. Click the OK button. You can set a new pass-
word on the Advanced screen later.
19
Starting the Web-based Utility
Overview
Figure 6-1
Instant Wireless ® Series
Now that the Game Adapter is configured properly, as
shown in the previous three sections, you can connect to
your game console and start gaming.
1. Plug the included Ethernet network cable into the Game
Adapter’s LAN port, as shown in Figure 5-22.
2. Plug the other end of the Ethernet network cable into the
RJ-45 port of your game console.
3. Plug the supplied power cable into the Game Adapter’s
Power port, as shown in Figure 5-23. Then, plug the
other end into an electrical outlet, preferably a surge pro-
tector.
4. Set your game console for multiplayer gaming as usual.
18
Connecting the Game Adapter to Your Game Console
Figure 5-22
Figure 5-23