GE 681131689496 - Manual (Page 6)

6
Inserting Dough Hooks
NOTE: The dough hooks must go into the correct sockets. The Mixer will operate
with the dough hooks in the wrong position. However, you will not get proper
kneading action and you could risk ruining a recipe. Read the following
instructions carefully.
1. Make sure Mixer is unplugged and speed control dial is set to OFF. Lift Mixer
head up and back to tilt it out of the way of the bowl, while holding it in an
upright position.
2. The dough hook with the small washer and foot goes into the socket on the side
of the Mixer nearest the side of the bowl. The other dough hook with the large
washer goes into the socket nearest the center of the bowl. Insert the dough hooks
one at a time by aligning the notches on the hooks with the slots on the Mixer
head. Use a combination of pressing and twisting motions until the dough hooks
snap into position. Please refer to the icons beside the sockets.
1. Small Washer Hook
2. Big Washer Hook