Replacing the diskette drive, To replace the diskette (floppy) drive – Gateway Profile 6 User Manual
Page 47
Advertising

www.gateway.com
41
8
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36
.
Replacing the diskette drive
To replace the diskette (floppy) drive:
1
Remove the back panel by following the instructions in
.
2
Remove the power supply by following the instructions
in
“Replacing the power supply” on page 40
. You do not
need to unplug the power supply from the system
board.
3
Pull the diskette drive release latch out (toward you).
8512032.book Page 41 Tuesday, January 9, 2007 1:47 PM
Advertising