Greenway Home Products MM255CH - Manual (Page 4)

3
Step 4
Locate the upper facing panel that will be attached to the left
and right legs and will sit above the firebox. Position this panel with
the finished cherry side facing the front of the mantel. Line up the
holes on each side, insert and tighten 2 screws on each side.
Step 5
Get your assistant and locate the top of your mantel. This top is
very heavy. It will take 2 people to lift and position it in place.
Ensure the top goes over the positioning guide located on the
header. The top must go over this guide to be positioned correctly.
Once the top is positioned correctly, insert and tighten 6 screws.
Step 6
If you are using this mantel in a corner application, locate the
triangular piece of wood which attaches to the mantel to create
the corner unit. You must attach this piece for all corner
applications. Simply take the triangle and slide the brackets with
the holes onto the pins which are already attached to the mantel.
Once the triangle is attached, push it up so it is level with the
mantel and lock it into place. To lock it into place simply turn the
horizontal wooden blocks attached to the underside of the mantel
into a vertical position to support the weight of the corner triangle.