GE 197D3354P013 - Manual (Page 6)

6
C
o
n
su
m
e
r
S
u
p
p
o
rt
Tr
o
u
b
le
sh
o
o
ti
n
g
Ti
p
s
O
p
e
ra
ti
n
g
In
st
ru
c
ti
o
n
s
S
a
fe
ty
In
st
ru
c
ti
o
n
s
In
st
a
ll
a
ti
o
n
In
st
ru
c
ti
o
n
s
Adjustable Humidity Crisper (on some models)
Slide the control all the way to the
HIGH setting to provide high humidity
recommended for most vegetables. Slide the control all the way to the LOW setting to
provide lower humidity levels recommended for
most fruits.
Snack Pan (on some models)
This pan can be moved to
the most useful location for
your family’s needs.
Fruit and Vegetable Crispers
Excess water that may
accumulate in the bottom
of the drawers or under the
drawers should be wiped dry.
About the crispers and pans.
Not all features are on all models.
Removing the glass cover
About the additional features.
Not all features are on all models.
ShelfSaver ™ Rack
This slide-out rack holds twelve cans of soda
or two wine/water bottles (lengthwise).
Can be removed for cleaning. To remove, slide the rack out to the stop
position, lift the rack up and past the stop,
and lift out.
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
To Remove:
Lift the drawers up slightly while pulling
them past the stop location.
If the door prevents you from taking out
the drawers, first try to remove the door
bins. If this does not offer enough
clearance, the refrigerator will need to
be rolled forward until the door opens
enough to slide the drawers out. In some
cases, when you roll the refrigerator out,
you will need to move the refrigerator
to the left or right as you roll it out.
To remove the glass cover:
Remove the glass, then the frame. When
replacing the glass, push the front edge
firmly into the frame.
Lift the back up off of its supports, slide it
backward, tilt it and take it out.
To remove the frame:
Lift the front of the frame, pull it forward,
tilt it and take it out.