Graco Inc. 223660 - Manual (Page 2)

2 307-730
CAUTION
To avoid premature wear of the pressure switch, never use more than 25 ft (7.6 m) of 1/4” ID outlet hose. When
longer outlet hose is needed, use 3/8” ID hose at a maximum of 100 ft (30 m) long. Never use 1/4” ID and 3/8” ID
hose together.
Do not use lacquer or lacquer thinner in the suction and outlet hoses supplied with this system. These fluids quickly
destroy the hose material. Use the optional chemical–resistant hoses.
See ACCESSORIES section of the manual for ordering optional hoses.
TERMS
Be sure you read and understand each of these terms be-
fore reading the rest of the manual.
WARNING: Alerts user to avoid or correct conditions
which could cause bodily injury.
CAUTION: Alerts user to avoid or correct conditions
which could damage or destroy the equipment.
NOTE: Gives additional explanation of a procedure or
helpful hints.
WARNING
Be sure all operators of this equipment read, understand,
and follow the warnings and instructions in this manual !
GENERAL SAFETY
Use extreme care not to splash paint, contaminated
flushing water, or solvent into your eyes. Wear protective
eyewear.
Be sure the area in which you are working is well venti-
lated, to avoid a buildup of harmful paint fumes.
To reduce the risk of electric shock, do not expose the
system to rain. Always store the system indoors. Do not
operate the pump with the base cover removed.
ELECTRICAL GROUNDING
Electrical grounding is essential to reduce the risk of an
electric shock or other serious bodily injury from static
sparking. Read and follow the grounding instructions on
page 6 of this manual.
EXTENSION MISUSE HAZARD
Do not attempt to modify the extension or roller frame, or
to use parts which are not designed for use with this sys-
tem. Use the extension only with the roller frame provided
with this system.
Improper use of the extension, roller frame, hose or roller
valve can result in component rupture or explosion and
cause serious bodily injury.
EQUIPMENT MISUSE HAZARD
This system is designed to be used at 250 psi (17.5 bar)
MAXIMUM WORKING PRESSURE . Use only compo-
nents or accessories which are designed for use with the
PT2000 System.
Any misuse of this equipment, such as modifying parts,
using incompatible paint or solvent, or using worn or
damaged parts, can cause the equipment to rupture and
result in serious bodily injury, fire, explosion and property
damage.
Never alter or modify any part of this equipment; doing so
could cause it to overpressurize or malfunction.
Check all parts of the system regularly and repair or re-
place any worn or damaged parts immediately.
AVOID POWER LINES
Avoid contacting any power lines with the extension.
Contact with power lines could cause extremely serious
bodily injury, including burns or electrocution.
HAZARD OF USING FLUIDS CONTAINING
HALOGENATED HYDROCARBONS
Never use 1,1,1–trichloroethane, methylene chloride,
other halogenated hydrocarbon solvents or fluids con-
taining such solvents in this equipment. Such use could
result in a serious chemical reaction, with the possibility
of explosion, which could cause death, serious bodily in-
jury and/or substantial property damage.
Consult your material suppliers to ensure that the fluids
being used are compatible with aluminum and zinc parts.