GE 21-Feb - Manual (Page 14)

14
HEADSET
H
EADSET AND
B
ELT
C
LIP
O
PERATION
C
ONNECTING A HEADSET TO
THE HANDSET
For hands free conversation, connect the
headset (for 2-6921 only) to the HEADSET
jack as shown. The handset receiver and
microphone are disabled when the
headset is connected.
Adjust the headset to rest comfortably on
top of your head and over your ear. Move
the microphone to approximately 2 to 3
inches from your mouth.
• Press the TALK button to answer or
place a call before using the headset.
Headset
jack
Headset plug
C
ONNECTING THE
B
ELT
C
LIP
There are two slots, one on each side of the
handset.
• Attach the belt clip (for 2-6921 only) by
inserting the sides of the belt clip into the
slots. Snap the ends of the belt clip into
place.
Slot for
belt clip Slot for
belt clip