Geneva Lab SOUNDS SYSTEM L - Manual (Page 9)

9
FM ANTENNA IN
75 OHM
SERIAL NUMBER Geneva Sound System
Model
Geneva Lab Corporation 10 First Ave East, PO Box 6 Mobridge, SD 57601, U.S.A. http://genevalab.com
Made in China Engineered in Switzerland
AC IN
AIR
LINE IN
LEFT
RIGHT
From GENEVA,
with love!
Ventilation holes
Line in
Jacks FM radio
antenna plug
AC Connector
AIR-Connector
for future use
Step 2: Insert the batteries into the remote control (see page 15). There are batteries
included in the package.
Step 3: Place the Geneva Sound System on one of its short sides. Ensure that the System is
placed on a soft material (carpet or textile) that does not scratch the surface. Insert the AC
power cable into the AC connector on the Bottom Panel (see picture below) and then con-
nect it to an AC outlet.
Please Note: If you have purchased a Floor Stand made for the Geneva Sound System,
assemble the Stand, remove the four rubber feet from the main Cabinet and attach the
Stand using the screws provided with the Stand. For detailed assembly, see Manual
provided in the Stand package.
Step 4: Return the system to an up-right position, so it stands on its four rubber feet.