Golden Technologies GB106 - Manual (Page 13)

Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR Updated 07/08
Page 13
OPERATION
When the power to your Buzzaround Lite
™ is turned on, an LED (Light Emitting
Diode) will illuminate. This LED is used in diagnosing operational problems that
may arise. See “Diagnostics” section on page 21.
Horn Button
Press this button to sound the horn.
Drive Control LEver
This self-centering drive control lever system controls your Buzzaround Lite
speed (up to the maximum speed set by the speed adjustment dial) as well as
the forward and reverse direction. This control system is also called the “Wig-
wag”.
To drive forward:
• Place your hands on the handgrips.
• Use your thumbs to operate the drive control lever.
• User your right thumb to press lightly on the “F” (forward motion) lever to
move your scooter forward.
• Increase the pressure applied by your thumb to increase your forward
speed.
• To stop your Buzzaround Lite, release all pressure on the lever. The lever
will automatically return to the center (neutral) position and your scooter
will come to a gradual stop.
Note: Always bring your Buzzaround Lite to a full stop before changing direction
from forward to reverse, or from reverse to forward.
To drive in reverse:
• Place your hands on the handgrips.
• Use your thumbs to operate the control levers.
• Use your left thumb to press lightly on the “R” (reverse motion) lever to
move your scooter in reverse.
• Increase the pressure applied by your thumb to increase your reverse
speed.
• To stop your scooter, release all pressure on the lever. The lever will
automatically return to the center (neutral) position and your scooter will
come to a gradual stop.