Golden Technologies GB106 - Manual (Page 31)

Buzzaround Lite™ Owner’s Manual – Models GB106 and GB106XR Updated 07/08
Page 31
ASSEMBLY OF YOUR BUZZAROUND LITE ™
WARNING: DO NOT SIT ON OR OPERATE YOUR SCOOTER UNLESS BATTERY BOX IS IN
PLACE AND THE LOCKING MECHANISM IS ENGAGED.
WARNING: BE AWARE OF ANY POSSIBLE PINCH POINTS WHEN CONNECTING THE
REAR FRAME TO THE FRONT FRAME. PLEASE NOTE WARNING LABLES AT PINCH
POINTS WHEN ASSEMBLING.
Pinching and crushing hazard!
Increased hazards due to pinching or crushing result due to the component
weight (such as batteries) during preparation for transport and maintenance
work.
- Always carry out any work to be done with great care.
- Always try to get help from a second person, especially when stowing
parts for transport.
Pinch Point : A pinch point is an area where you MUST consider your fingers to
be sure your fingers DO NOT become pinched between two metal areas. The
greatest chance of pinch points become possible during the assembly of the
Buzzaround Lite
™ scooter. See photo below to become knowledgeable with this
area.
WARNING!!!
Be sure not to position a finger between
the metal frames! This can cause
injury. Look very carefully before
assembling!