Graco Forward Facing Child Restraint User Manual
Page 26
Advertising
26
6. If you are using tether to
hold seat in place, secure
it now. See Section 7.4
Using the Tether, page 30.
When not using the tether,
hook it on the tether
storage bar on the back
of the seat.
7. Safety Check for
Secure Installation
Perform this test every
time you drive with your
child.
Holding the child restraint
near the vehicle belt path,
TWIST AND PULL the child
restraint forward and to
both sides to make sure
the vehicle belt does not
lengthen or loosen and the
child restraint does not
easily move
➊
. The child
restraint should not move
side to side or forward more
than 1 inch (2.5 cm).
If child restraint is loose
or not secure, repeat
procedure OR find another
location for the seat, see
Section 6.0 Child Restraint
Location, pp. 17-21.
gra
co
ba
by.
com
➊
Advertising