Graco Forward Facing Child Restraint - Manual (Page 30)

30
7.4 Using the Tether
1. Check that tether is
securely attached to
child restraint.
2. Fasten tether clip to
anchor point
➊
.
3. Tighten the tether
strap securely
➋
.
4. Check child restraint
tightness after securing
tether. If necessary,
retighten vehicle seat
belt. Belt must lay flat
and not be twisted.
5. To loosen, lift up on
the metal tongue of
the buckle
➌
.
All LATCH seating positions have tether anchors. If you
want to use the tether, check your vehicle owner’s
manual for the location(s). If your vehicle is not equipped
with a tether anchor, it may be possible to install one.
Contact your vehicle dealership for the proper anchor
location and installation. You may purchase a tether
anchor parts kit by calling Graco Customer Service at
1-800-345-4109.
➊
➋
➌