Gateway 450 - Manual (Page 242)

231
Updating device drivers
www.gateway.com
Updating device drivers
The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.
To update device drivers:
1
Insert the red Gateway CD into the CD, DVD, or recordable drive. If the
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click Start , then click Run . The Run dialog box opens.
3
In the Open text box, type d:\runmenu.exe (where d is the drive letter of
the CD, DVD, or recordable drive).
4
Click OK .
Important If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the red Gateway CD or the Gateway
Technical Support Web site (www.gateway.com/support).
If your system came equipped with an internal embedded
wireless device, see “Safety, Regulatory, and Legal
Information” on page 291 for general wireless regulatory
and safety guidelines.To find out if your system has an
internal wireless device, check the label (see “Identifying
your model” on page 12).
Important If the drive you want to use is not in the modular bay, you
need to swap modules. For more information about
swapping modules, see “Changing drives” on page 242.