GameTime PM0503-08 - Manual (Page 6)

COPYRIGHT © 2006 MERIT ENTERTAINMENT
Monitor Adjustment Procedure
The vertical/horizontal controls and bright-
ness/contrast controls are located on the
control board (see Figure 2).
Pressing the button labeled Menu on the
control board will show an on-screen dis-
play of the monitor settings. Use the Left
and Right buttons to move through the menu.
Touch Menu to select the option you want to
change. Use the Left and Right buttons to
change the option. Then press Menu again
to deselect the option. Auto will automati-
cally adjust the size and brightness. Touch
the Exit button to exit. Adjust the monitor
controls until the screens look as suggested
in the following steps:
1. Set the game to the Checkerz game
screen.
2. Adjust the vertical and horizontal size
and vertical and horizontal position to
make sure that the game screen fills
the monitor screen and that the game
screen is centered.
3. Adjust the brightness and contrast con-
trols until the top sets of checkers are
a rich red and the bottom set are a dark
gray. The feet on the “Checkerz”
character should be white. (Adjusting
the brightness and contrast can also
correct a lack of sharpness.)
Cleaning the Cabinet
• The cabinet should be cleaned with a
dry cloth and mild detergent. Always
apply the cleaner to the cloth and not
directly on the game. Liquids could
enter the cabinet and damage electron-
ics inside.
Cleaning the Touchscreen Monitor
• The touchscreen glass should be
cleaned with a damp cloth and isopro-
pyl alcohol or a non-ammonia cleanser.
Do not use any abrasive or vinegar-
based cleansers, as they will damage
the touchscreen glass. Always apply
the cleaner to the cloth and not directly
to the glass. Liquids could enter the
cabinet and damage electronics inside.
NOTE: DO NOT USE ANY ABRASIVE
SOLVENTS, ACID OR VINEGAR-BASED
CLEANSERS ON THE TOUCHSCREEN
OR SIDE DECALS. SUCH CLEANSERS
COULD HARM THE TOUCHSCREEN
AND ERASE THE DECALS. BE CARE-
FUL NOT TO USE COMMERCIAL
CLEANERS CONTAINING ANY OF
THESE SUBSTANCES.
Cleaning the Fans and Vents
• The fans and vents should be cleaned
of any dust and grime on a regular
basis to ensure proper ventilation of
the game.
• To ensure proper operation of the
game, it is important that all fans are
operating correctly and that the airflow
is unobstructed. Make sure nothing is
placed next to the fan vents that would
inhibit the flow of air. Also, if any fans
are not operating, it is important that
the game be sent in for service.
Watchdog Timer
This game has been equipped with a fea-
ture that allows it to automatically reboot if it
encounters a problem. When the watchdog
timer is enabled, it will reboot the machine
within 2 minutes after a failure, allowing the
game to automatically reset itself if a prob-
lem arises without needing a technician
present.
PM0503-08 MEGATOUCH GAMETIME OWNER’S MANUAL 4