Goldmund MIMESIS 330 User Manual
Page 8
5
AMPLIFIER CONTROLS
Manual Operation
On the front plate of the GOLDMUND MIMESIS 330 amplifier you will find only two POWER
keys.
In the Manual Operation mode, the two POWER keys have to be activated simultaneously
to power the amp on.
This security feature is provided to avoid accidental POWER ON or POWER OFF.
When the two keys are pressed simultaneously, the amp switches on in "Operating" mode
and the center green Led lights on showing the amp is POWERED ON.
If the digital input is used, the yellow Led may flicker, showing there is no lock and the amp
remains muted until a lock is found.
With an analog input, the amp is immediately operational.
By pressing the right key once, the amplifier is put in Mute mode, and the green Led flickers.
By pressing the right key once again, the amplifier returns to "Operating" state.
The amp may be POWERED OFF by pressing the two POWER keys simultaneously at any
time.
User manual - GOLDMUND MIMESIS 330 ANALOG INTEGRATED AMPLIFIER
|
P 7