Goldmund MIMESIS 330 - Manual (Page 9)

5
AMPLIFIER CONTROLS
POWER
The MIMESIS 330 Analog Integrated Amplifier is powered on using the switch located on the
back panel. In regular use this switch should be left ON at all times (See Sound Quality
Optimization). The standby function of the remote control should be used to mute the signal
for the safe removal of cabbles.
The Amplifier is powered OFF by switching the back panel switch to the OFF position. A
saftey circuit switches the unit to mute to avoid any diusturbance reaching the speakers.
MUTING
Muting is controlled using the remote control. It can be used to turn the volume down
temporarily without touching or changing the volume control. When returned to normal, the
volume is returned to its level at the point the muting was activated.
VOLUME
Volume may be adjusted manually by turning the volume control knob, or by using the
VOLUME + or - on the remote control.
SELECTOR
Selects one of the eight (if the D/A option is selected, five if not) available inputs for listening.
One step clockwise selects the next input. Selection may also be made using the remote by
pressing the key corresponding to the input on the Analog section of the remote.
OPENING VOLUME MEMORY
This function is only accessible via the remote control. It allows the volume to be
automatically set to the level fixed when the unit is turned ON.
To adjust the level, first play at the desired output level, then press MEMO on the remote.
If at any time during playback you wish to return to this level, just press the RESET button.
User manual - GOLDMUND MIMESIS 330 ANALOG INTEGRATED AMPLIFIER | P 8