GE 20621 - Manual (Page 10)

10
Using Your Remote, cont.
Controlling Devices with Separate Power On and Off Buttons
Some GE, RCA and ProScan models require you to press the device
button for more than one second to turn the device on and the
ON•OFF button to turn the device off.
Controlling Combo Devices
Some Combo devices (e.g., TV/DVR, TV/DVD, DVR/DVD, etc.) will
require you to set up two different Mode buttons to control both
parts of the Combo device. For example, if you have a TV/DVD
Combo, you might need to set up one code under the
TV button to
control the TV part AND a separate code (under any other Mode
button) to control the DVD part.
DVR/DVD Punch-Through
This remote allows the 6 DVR transport buttons (i.e., PLAY, PAUSE,
STOP, FF, REWIND, and REC) to Punch-Through control from any
Mode programmed with TV, SAT or Cable codes to the last
DVR, or
DVD programmed Mode you used. This feature will not operate if
the programmed TV, SAT or Cable code has its own DVR transport
button control, e.g., a TV Combo, DVR/SAT, etc.
Volume/Mute Control and Punch-Through
This remote lets you select which device Mode controls your
Volume/Mute buttons. The remote is initially set for all device
Modes to use their own Volume/Mute control if present. If the
programmed code has no Volume/Mute operation of its own then
those buttons will punch-through control to the
TV Mode device
without needing to change to TV Mode.
Any Mode chosen for Volume/Mute control MUST have its own
Volume/Mute function or the Volume/Mute buttons will do
nothing.