GE A8950CC - Manual (Page 44)

Main -> Local -> Test -> LED/LCD/Alarm:
This selection runs through a series of three tests:
1. LED Test: All LEDs turn off, then turn green, and then turn red.
2. LCD Test: The screen turns black. Then the GE logo is displayed.
3. Alarm Test: The front panel alarm sounds for a few seconds.
Main -> Local -> Test -> Temp:
This selection displays the temperature of inside optic transceiver A.
Main -> Local -> Test -> Video:
This menu is identical to the Main -> Local -> Video -> Test Menu, described earlier.
Main -> Local -> Test -> Data:
This menu is identical to the Main -> Local -> Data -> Format Menu, described earlier.
Main -> Local -> Test -> Audio:
This menu is identical to the Main -> Local -> Audio -> Test Menu, described earlier.
Main -> Local -> Test -> Contact:
This menu is identical to the Main -> Local -> Contact -> Configure Menu,
described earlier in this section.
Main -> Local -> About:
The Local About Menu displays the software version for each module installed in the
chassis. Press "+" to view the next slot. Press "-" to view the previous slot.
About Menu:
1
Slot
3
Rev
Data
Card Type
42