Grizzly H6310 - Manual (Page 7)

Model H6310 Jump Starter/Compressor -5 -
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H6310 Jump Starter/Compressor. This
model is part of a growing Grizzly family of
fine power tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The Model H6310 is designed to be
charged from a 110V outlet, then stowed
away in an automobile for later use. The
Model H6310 features a flashlight, hazard
lights, a jump starter, a tire inflater, and
four DC outlets for powering various DC
operated accessories.
It is our pleasure to provide this manual
with the Model H6310. It was written
to encourage safety considerations and
guide you through general operating pro-
cedures and maintenance.
The specifications, details, and photo-
graphs in this manual represent the Model
H6310 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Read the manual before operation.
Become familiar with this jump start-
er/compressor, its safety instructions,
and its operation before beginning
any work. Serious personal injury may
result if safety or operational informa-
tion is not understood or followed.
Foreword Contact Info
Machine Data
Charging Source .................................110V
DC Output ....................... 3V, 6V, 9V & 12V
Max. Air Compressor Run Time .......15 Min
Rated Air Exhaust Volume ..........0.35 CFM
Jump Start Current ............................600 A
Charging Current ............................500 mA
Hazard Blink Frequency ..... 120 per minute
Illumination Power .......................... 6 Watts