GE PB3-POS-RP - Manual (Page 19)

19
Dip Switch Settings
This chapter deals in detail with the Dip Switch Settings. The
PB3 must be re-initialized before any changes to the switch
settings will be recognized.
SW1 Settings
SW1 –Switches 1-4
The first four switch positions on SW1 are programmed to
provide special functions on the PB3 for display and
troubleshooting. Under normal installations these settings do not
need to be changed from the defaults.
Switch Function 1 2 3 4
Display Memory D D U U
Demo Mode D D U D
Reset (Clear Memory) D D D D
Auto Line Feed D U D D
Display Mode
This setting displays all internal memory settings through Port 1
on the text box window of the selected camera on a DVMRe
Triplex. This allows you to quickly check what settings are in
your unit.