Gefen EXT-HDMI-CAT5-844 - Manual (Page 12)

9
RMT-16IR* REMOTE CONTROL DESCRIPTION
The RMT-16IR remote control will allow the user to select which source will be routed
to which output. Each of the 4 outputs are assigned a group of 4 buttons that will
correspond to the 4 source inputs. Each button on the RMT-16IR remote control will
toggle between the “A” and “B” sources for each input. Please use the information
below when selecting the desired source for each display. The LED will blink each
time a button press is detected
RMT-16IR Button Source Display
1 Toggle 1A and 1B 1
2 Toggle 2A and 2B 1
3 Toggle 3A and 3B 1
4 Toggle 4A and 4B 1
5 Toggle 1A and 1B 2
6 Toggle 2A and 2B 2
7 Toggle 3A and 3B 2
8 Toggle 4A and 4B 2
9 Toggle 1A and 1B 3
10 Toggle 2A and 2B 3
11 Toggle 3A and 3B 3
12 Toggle 4A and 4B 3
13 Toggle 1A and 1B 4
14 Toggle 2A and 2B 4
15 Toggle 3A and 3B 4
16 Toggle 4A and 4B 4
*The RMT-16IR is an optional accessory.
LED Indicator
Input Selection
Buttons