Grundig SATELLIT 750 - Manual (Page 13)

13
SATELLIT 750 OWNER’S MANUAL
LISTENING TO WHAT’S STORED continued
• To go from one memory to another give a quick, short press
to either the up or down tuning button , or use the tuning
knob.
• To auto-scan memory press one of the up or down tuning
buttons for about 2 seconds and notice that PRESET flashes.
The radio scans from one memory to another, staying on each
memory for about 5 seconds. To stop the scan give the up or
down tuning button a quick, short press.
• Turn on the radio and press the VM/VF button, causing PAGE and
PRESET to appear in the display’s upper right corner.
• Use the numeric keypad, the tuning knob or the up/down tuning
buttons ( ) to select the memory that you want to delete. To
delete the memory press the DELETE button for about
• Turn on the radio and select the page that you want to delete
by pressing PAGE, note that page flashes in the display’s upper
right. While it’s flashing use the numeric keypad, the tuning knob
or the up or down tuning buttons ( ) to select the page that
you wish to delete.
• Press and release the VM/VF button so that PAGE and PRESET
appear in the display’s upper right corner. If - - appears above
PRESET in the display’s upper right corner, the page is already
deleted and you don’t have to continue.
• Press DELETE for about 3 seconds or until PAGE starts blinking
and press DELETE again.
DELETE ONE MEMORY
DELETE A MEMORY PAGE