Grundig SATELLIT 750 - Manual (Page 17)

17
SATELLIT 750 OWNER’S MANUAL
A quick press of the LIGHT button gives about 5 seconds of il-
lumination to the SIGNAL strength indicator and the display. A long
press lights these for as long as the radio is turned on, so be careful
if you’re operating on batteries, because it will make them drain
faster. If you’re AC adapter is connected, it’s fine to keep the light
on while the radio plays.
The earphone socket is on the lower left front of the radio and is la-
beled EAR. Plug in earphones and headphones using a 3.5 mm (1/8
inch) stereo plug. Turn the volume down before plugging them in.
The LINE-IN socket is on the lower left front of the radio and allows
you to route the sound from another device to the Satellit 750. Use
a cord with a 3.5 mm (1/8 inch) stereo plug. This socket uses an
industry standard line level input.
On the back of the radio are the left and right line-out sockets,
labeled LINE OUT. These sockets use an industry standard line level
output and can be routed to any industry standard line level input.
The external antenna sockets are used to connect the SATELLIT 750
to advanced performance antennas.
USING THE LIGHT BUTTON
EARPHONE SOCKET
LINE-IN SOCKET
LINE OUT SOCKETS