Quick reference operating instructions, Creating a control plan – Gardena 1243 User Manual
Page 4
23
G
22
G
The 3 Display Levels
Main Level
Time Level
Programme Level
Changing the Display Level :
v Press the Menu + key.
The display changes to the next level.
If you do not press another key within 2 minutes, the main level
appears automatically on the display.
4. Quick Reference Operating Instructions
v Enter the data for the watering programmes on the control plan
(see Appendix).
v Label the irrigation valves and radio switches corresponding to
the channels of the watering plan using the stickers provided.
1. Mount aerial.
2. Connect the Central Radio Control Unit to the mains via the
power pack and insert the batteries (use 1.5-volt alkaline AA
batteries only).
The batteries prevent loss of data if a power failure occurs.
1. Set the hours using the
▲-▼ keys and confirm by pressing
the OK key.
2. Set the minutes using the
▲-▼ keys and confirm by pressing
the OK key.
3. Set the day of the week using the
▲-▼ keys and confirm
by pressing the OK key.
1. Press the Setup key (e.g. using the tip of a pen).
2. Insert batteries in just
one Radio Receiver
– or – just one Radio Switch.
3. Set channel number(s) using the
▲-▼ keys and confirm
by pressing the OK key.
4. Repeat steps 1 to 3 for each receiver until you have registered
all receivers.
1. Press the Menu + key twice.
2. Select the programme memory location using the
▲-▼ keys
and confirm by pressing the OK key.
1. Create control plan :
2. Label irrigation valves
and radio switches :
3. Put Central Radio Control
Unit into operation :
4. Enter current time
and day of the week :
5. Register Receiver :
6. Set the Control Programme
(
PROG
) :
5. Creating a Control Plan
v Enter the data of the watering programme in the control plan
(see appendix).
Example of a Control Plan :
Receiver
Channels
PROG START-TIME RUN -TIME
3rd
2nd Mo Tu We Th Fr Sa Su
Sensors
Sprinkler-
1
1
5:00
1:00
X
1
System
2
2
7:00
1:00
X
1
3
3
18:00
1:00
X
1
Micro-Drip-
4
19:00
0:30
X
X
X
X
X
X
X
4
System
4
5
6:00
0:30
X
X
X
X
X
X
X
4
Lightline
5
6
20:00
2:00
X
X
X
X
X
X
X
–
Pond
7
9:00
3:00
X
X
X
X
X
X
X
–
pump
6
8
13:00
5:00
X
X
X
X
X
X
X
–
Garden
pump
M
–
–
–
–
1. Set the hours for the programme start time using the
▲-▼ keys
and confirm by pressing the OK key.
2. Set the minutes for the programme start time using the
▲-▼
keys and confirm by pressing OK.
1. Set the hours for the programme run time using the
▲-▼ keys
and confirm by pressing OK.
2. Set the minutes for the programme run time using the
▲-▼ keys and confirm by pressing OK.
Every 2nd or 3rd day:
v Set the arrow L to 2
nd
or 3
rd
using the
▲-▼ keys and confirm
by pressing OK.
Any day of the week :
v Set the arrow L to the correct day using the
▲-▼ keys and
confirm the day by pressing OK.
1. Set the arrow V to the channel you require using the
▲-▼ keys
and activate the channels by pressing OK.
2. Press Menu + to return to the program selection screen.
1. Press the Man On / Off key.
2. Set the V to the channel using the
▲-▼ keys and open or close
the channel by pressing OK.
The opening time is set to 30 minutes as a default but the opening
time can be set manually as required (see 8.1
Opening / Closing
Channel Manually).
7. Set programme start time
(
START-TIME
) :
8. Set the programme run time
(
RUN-TIME
) :
9. Set the watering days :
10. Assign the programme
to the channels :
11. Manual Operation :