Garmin Fishfinder 100 - Manual (Page 27)

19
Unit Operation
Setup Menu/Tools
Flasher
With the ‘Flasher’ tool active, a graphic Flasher representation will be
displayed on the far right side of the chart. This graphic Flasher displays
structure and bottom returns much the same as a true Flasher. You may
find this feature particularly useful when using ‘Fish Symbols’.
To Turn the Graphic Flasher On and Off:
1. Highlight the ‘Tools’ tab on the Setup Menu
2. Highlight the ‘Flasher’ selection field and press ENTER.
3. Select ‘ON’ or ‘OFF’ and press ENTER to accept the selection.
Simulator
The ‘Simulator’ tool allows you to select a transducer type for use with
the Fishfinder 100’s built in simulator. These choices allow the simulator to
more accurately depict actual operation of the unit. For details on using the
simulator see page 33.
Graphic Flasher Selections
Graphic Flasher Tool
Simulator Transducer Selections
100 Operation.p65 2/16/00, 10:07 AM 19