Ginnys F2000 - Manual (Page 5)

CLEANING INSTRUCTIONS
8
Warning:
Do not use the “Break - Away” Power
Cord to disconnect the Deep Fryer.
Always disconnect plug from electrical
outlet first before removing the power
cord.
Warning :
The “Break-Away” Power Cord is only
for accidental disconnection of the
Deep Fryer. It is not to be removed
during normal operation. If the cord
should be disconnected from the unit
during operation, the user should
immediately unplug the power cord
from the electrical wall outlet before
any attempt to reconnect the magnetic
cord back to the deep fryer unit. Do
not come in contact with the magnetic
connection of the power cord while it
is plugged into electrical wall outlet.
Injury can occur.
Warning:
Do not attempt to defeat the magnetic
cord connection by attempting to
permanently attach the power cord to
the Deep fryer.
Detachable “Break Away”Power Cord
Your Ginny’s Cool Touch Deep Fryer
has been specifically designed with
your safety in mind. Your Deep Fryer
has a unique detachable power supply
cord. This power supply cord is
designed to “Break Away” from the fryer
in the event that the power cord or fryer
is inadvertently pulled or tugged. This is
intended to prevent the tipping of the
appliance and hazardous spillage of hot
oil.It is NOT intended to disconnect the
fryer during normal use
To connect the power cord - note the
instructions on the cord plug area -
“THIS SIDE UP”. Place cord into
opening - you will feel the magnetic pull.
Slide cord into slot until it connects.
(See Fig. 8)
Fig. 8
TEMPERATURE and COOKING GUIDE
The following cooking times reflect only the approximate time needed to fry one
basket 1/2 full. The exact time may be different depending on actual quantity,
personal cooking preferences, size and thickness of pieces, etc... In general, use
lower settings for delicate foods (vegetables, fish) and higher settings for frozen
foods, French Fries and Chicken.
Temperature Settings
Food Cooking Tim e Tem perature
French Fries 6-9 minutes 375 °F
Fish Fillets 3-5 minutes 320 °F
Chicken Fingers 6-8 minutes 350 °F
Chicken Pieces 13-20 minutes 350 °F
Fried Zucchini 3 m inutes 320
°F
Fried Mushrooms 3 m inutes 320 °F
Onion Rings 3 m inutes 320 °F
Donuts 3-5 minutes 350 °F
Apple Beignets 4 m inutes 350 °F
Shrimp 4-6 minutes 320 °F
www.ginnyscatalog.com
• Make sure the Deep Fryer is
unplugged and the oil has cooled
(approximately 2 hours) before
attempting to clean or store the Deep
Fryer.
• The oil does not need to be changed
after each use. We do not recommed
storing and reusing oil that was used
for frying high protein foods such as
poultry,fish or other meats. When oil
is mainly used to fry potatoes and is
filtered after each use, it can be used
8 to 10 times. However, do not use
the same oil for longer than 6 months.
Storing used oil
Fig. 5
Filtering used oil.
Fig. 6
CLEANING INSTRUCTIONS
7
Warning: Always turn unit OFF
and remove the plug from the wall
socket before cleaning. Allow the
Deep Fryer and the oil to to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
Control Panel, cord, plug or main
enclosure in water or any other liquid.
Cleaning Instructions
• Please read and follow all
instructions in this manual for best
results with your Deep Fryer.
• Never immerse the Control Panel,
cord, plug or main enclosure in water
or any other liquid.
• Do not place the Control Panel, cord,
plug or main enclosure in the
dishwasher.
• Clean the Control Panel and main
enclosure only with a damp cloth.
• The Oil Container, Frying Basket and
Cover can be washed in the
dishwasher. Always remove filter
and filter cover before washing in the
dishwasher.
• The main enclosure of the Deep
Fryer can be washed with warm
soapy water. Do not immerse the
main enclosure of the Deep Fryer in
the dishwasher.
OPERATING INSTRUCTIONS
To Store or Reuse Cooking Oil
• Do not use any type of abrasive pad
or steel wool to clean the Power
Cord magnetic socket.
• Do not use alcohol or cleaning
solutions to clean Deep Fryer.
Replacing and Cleaning Filter
1. Open the Filter Cover.
2. Remove Filter. Filter may be washed
in hot soapy water. Allow Filter to air
dry before using.
3. Clean inside of the cover with a damp
soapy cloth or sponge. Rinse and dry
thoroughly.
4. Replace Filter by inserting charcoal
(dark side) facing up closest to the
filter cover. The white side is on the
bottom. (Fig. 7)
Fig. 7
• To filter the oil first make sure the oil
has cooled and then empty the oil
from the Oil Container into a storage
container or bottle. (See Fig. 5) Wash
and dry the Oil Container and basket.
To reuse, refill the Oil Container with
the oil, pouring the oil through a wire
strainer or paper filter. (See Fig. 6)
www.ginnyscatalog.com