GIGABYTE PHASER 4500 - Manual (Page 24)

- 18 - GA-7VAX/GA-7VAXP Motherboard
English
6)IDE1/ IDE2 (IDE1/IDE2 Connector) Ø Important Notice:
Please connect first harddisk to IDE1 and
connect CDROM to IDE2.
The red stripe of the ribbon cable must be the
same side with the Pin1.
IDE1
1
IDE2
1
7)IDE3/IDE4 Connector *
(RAID/ATA133,Green Connector) Important Notice:
1. The rad stripe of the ribbn cable must be the
same side with the Pin1.
2. If you wish to use IDE3 and IDE4, please use
it in unity with BIOS (either RAID or ATA133).
Then, install the correct driver to have proper
operation. For details, please refer to
the RAID manual.
IDE4
1
IDE3
1
8)FDD (Floppy Connector)
1
Ø Please connect the floppy drive ribbon cables
to FDD. It supports 360K,720K,1.2M,1.44M
and 2.88Mbytes floppy disk types.
The red stripe of the ribbon cable must be the
same side with the Pin1.
"*" FOR GA-7VAXP Only.