GIGABYTE PHASER 4500 - Manual (Page 45)

BIOS Setup - 39 -
English
FParallel Port Mode
MThis feature allows you to connect with an advanced print via the port mode it supports.
8 SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
8 EPP Using Parallel port as Enhanced Parallel Port IRQ5.
8 ECP Using Parallel port as Ex tended Capabilities Port using IRQ7.
8 ECP+EPP Using Parallel port as ECP & EPP mode.
FGame Port Address
8 Disabled Disabled this function.
8 201 Set Game Port Address to 201. (Default Value)
8 209 Set Game Port Address to 209.
FMidi Port Address
8 Disabled Disabled this function.
8 300 Set Midi Port Address to 300.
8 330 Set Midi Port Address to 330.(Default Value)
F Midi Port IRQ
8 5 Set 5 for Midi Port IRQ. (Default value)
8 10 Set 10 for Midi Port IRQ.
F Smart Card Interface *
8 Enabled Enabled smatr card interface function.
8 Disabled Disable this function.(Default v alue)
FMS/SD Interface *
8 Disabled Disabled this function. (Default Value)
8 Secure Digital Set MS/SD Interface to “Secure Digital” .
8 Memory Stick Set MS/SD Interface to “Memory Stick” .
*FOR GA-7VAXP ONLY
I f “OnBoard SC Interface” is set to “Enabled” and “OnBoard MS/SD Interface” set to “Memory Stick” at the
same time, there w ill not be enough IRQ resource to solv e this issue, there are tw o alternativ e solutions:
1.Use USB Mouse instead of PS/2 Mouse.
2.Disabled either “Onboard Serial Port1” , “Onboard Serial Port2” or “Onboard Parallel Port” in BIOS setting.