Motorola digital cellular phone - Manual (Page 72)

72
Managing Security Options
(continued)
2. Press to clear the memory and reset all your
phone’s options back to their factory settings. You
will see
Busy . (This takes a few seconds.)
or
Press º to exit the menu if you do not want to
reset your phone’s options.
3. Press º to exit, or scroll to other features.
Authenticating Users
Your StarTAC Digital Cellular Telephone is equipped with an
authentication feature called the A-Key, which acts like a PIN
number and helps prevent unauthorized use of your phone.
Contact your Service Provider for your personalized
A-Key number.
Note: This feature should only be programmed once.
1. Follow the steps in the ”Getting to Security
Options…” block to select
A-Key Entry . The display
will show the phone's active phone number.
If the number displayed is not the number you want
for the A-Key, press
« or » to switch to the
second programmed number. Your phone will use
this number once you exit this feature.
2. Enter the 6- to 26-digit A-Key number as supplied by
your Service Provider. Press
Ç to correct errors.
3. Press ¬ to validate the A-Key entry.
• If you input the A-Key correctly, you will see
VALID .
• If you input the A-key input incorrectly, you will
see INVALID . Re-enter your A-Key.
4. Press º to exit, or scroll to other features.
TDMA.book Page 72 Thursday, October 29, 1998 9:52 AM