MTD 200 - Manual (Page 3)


Model Series 200 - Chute & Handle
Ref
No.
Part Number Description
1 684-04127 Chute Assembly
2 710-04071 Carriage Bolt 5/16-18 x 1.0”
3 710-0451 Carriage Bolt 5/16-18 x 0.750”
4 712-04063 Flange Lock Nut, 5/16-18
5 720-0284 Wing Knob, 5/16-18
6 731-04388A Chute Handle
7 731-04426A Upper Chute
8 736-0119 Lock Washer, 5/16
9 710-04532 Carriage Screw, 5/16-18 x 2.0 Gr. 5
10 732-04111 Chute Adjustment Spring
11 725-0157 Cable Tie
12 710-0805 Screw, 5/16-18 x 1.50
710-3025† Screw, 5/16-18 x .625
13 747-04165 Bail, Standard
747-04159A Bail, Gull Wing
14 749-1092A Upper Handle, Standard
749-04106 Upper Handle, Gull Wing
15 684-04043 Shroud Assembly 2 Cyc. 3.5hp.
684-04044 Shroud Assembly 2 Cyc. 4.5hp.
684-04161 Shroud Assembly 2 Cyc. 5.5hp.
16 710-04187 Screw, 1/4-15 x .50
17 710-04669 Self-tapping Screw, #10-16 x .625”
18 710-1882 Hex Flange Screw 5/16-18 x 1.50
19 712-0252 Hex Nut 5/8-32 x .12 Special
20 725-2018 Key Switch-Electric Start
21 736-0225 Lock Washer Internal .625 x 1.058
22 731-04886 Chute, Adapter 5” Dia
23 750-0589 Spcr., .325 ID x .625 OD x .88 Lg.
24 736-0362 Flat Washer .330 x 1.25 x .06
25 710-0134 Screw, 1/4-20 x .62
26 710-3008 Truss Machine Screw, 5/16-18 x .75
27 712-04064 Hex Flange Lock Nut, 1/4-20
28 731-1033 Shave Plate,19.88
29 736-0176 Flat Washer .265 x .938 x .120
30 746-04237 Control Cable
31 749-04114 Lower Handle
32 725-0201 Ignition Key
33 731-1133C Spark Plug Cover
34 731-04127 Lower Chute 5” Dia
35 731-04353 Ring-Lower Chute
NOTE: Snow thrower features/components vary by model. NOT all parts listed above and pictured on the previous page are standard
equipment.