MTD 200 - Manual (Page 5)


Model Series 200 - Auger & Drive System
Ref
No.
Part Number Description
1 629-0236†† Extension Cord
2 710-0627 Hex Screw, 5/16-24 x .75
3 710-1003†† Screw, #10-16 x .625
4 7510009630* Recoil Handle
5 712-04063 Hex Flange Lock Nut, 5/16-18
6 725-0157†† Cable Tie
7 726-0154 Push Mount Cable Tie
8 726-0205 Clamp, Hose
9 750-0716A† Spcr., .630 x .880 x .747
10 736-0242 Bell Wash., .340 x .872 x .060
11 747-04150 Gas Tank Support Wire
12 7511825510 Choke Lever Knob
13 751-0535 Hose, Fuel Line
14 751-10023 Tank, Fuel
15 751-10487 Cap, Fuel
16 754-0367† V-Belt
754-0101A†† V-Belt
17 756-0416B Pulley Half, .625 ID x 2.25 OD
18 756-04243† Pulley, V Type, 3/8 x 6.0 OD
756-04232†† Pulley, V Type, 1/2 x 6.0 OD
19 790-00225 2-Cycle Mounting Bracket
20 734-04070 Wheel, 7 x 1.61 Dia. Tread
734-04063 Wheel, 7 x 1.5 Star Dia. Tread
21 684-04253 Auger Assembly Complete
22 710-0106 Hex Screw, 1/4-20 x 1.00 Gr. 5
23 710-0642 Hex Screw 1/4-20 x .75 Gr. 5
NOTE: For a proper working machine,
use Factory Approved Parts. V-belts
are designed to engage and disengage
safely. A substitute (non OEM) V-belt
can be dangerous by not disengaging
completely.
NOTE: Snow thrower features/components vary by model. NOT all parts listed above and pictured on the previous page are standard
equipment.
† Equipped with Non-Electric Start
Units
†† Equipped with Electric Start Units
* If Equipped
Ref
No.
Part Number Description
24 710-0653 Self-tapp Screw, 1/4-20 x .375
25 710-0896 Hex Screw, 1/4-14 x 0.625”
26 710-1005 Screw, 1/4-14 x .500
27 684-04227 Auger Assembly Housing 21”
28 712-04064 Hex Flange Lock Nut, 1/4-20
29 726-0299 Push Cap, 1/2”
30 732-0357A Extension Spring
31 736-0176 Flat Washer .265 x .938 x .120
32 750-04758 Spacer, Auger, RH
33 736-0329 Lock Washer, 1/4
34 741-04188A Ball Bearing
35 684-04168 Idler Pulley
36 748-0234 Shoulder Spacer .25
37 712-0896 Hex Lock Nut 1/4-28
38 790-00249 Bearing Cup
39 790-00238A Idler Brkt. w/Brake
40 790-00045A Belt Cover
41 756-0625 Cable Roller
42 735-04033 Rubber Paddle
43 735-04032 Crescent Spiral
44 750-04571 Shldr., Spcr., .260 x .785 x .538
45 7510009636* Recoil Handle, Mitten
46 7512B1476 Primer
47 738-0924A Carriage Screw 1/4-28
48 750-04757 Spacer, Auger, LH