Connections to tv, Connections to tv and vcr – Motorola Vanguard 305 User Manual
Page 45
Installation
DSR305 User Guide
37
Completing the Receiver Connections to a Third
Component
You will need to make changes to connect your VCR.
•
Connect the top/left TV port on the back panel of the receiver to the IN port on
the VCR. If you have already connected this cable to your TV you must
disconnect and connect it to your VCR.
•
Connect the OUT port(s) on the VCR to the VHF IN port(s) on the TV.
Connections to TV
Complete the following steps if you only plan to connect the satellite receiver to
an audio/video monitor:
•
Using standard RCA-type audio/video cables, connect the TV (VIDEO output)
port on the rear panel of the receiver to the video input port on the TV (or TV
monitor using the baseband inputs).
•
Using standard RCA-type audio/video cables, connect the two speaker (R and
L) ports on the back panel of the receiver to the audio input ports on the TV (or
TV monitor using the baseband inputs).
Connections to TV and VCR
Complete the following steps if you plan to connect the satellite receiver to a TV
and VCR or audio/video monitor:
•
Using standard RCA-type audio/video cables, connect the TV (VIDEO output)
port on the rear panel of the receiver to the video input port on the VCR.
305.book Page 37 Tuesday, April 15, 2003 11:15 AM