Document Outline

• Network Interface Card
• Foreword
  • Software License Agreement and Warranty
  • Limited Software Warranty
  • Software License Agreement and Warranty
  • Welcome
• Contents
• Ch.1 Introduction
  • 1.1 What's in the Package
  • 1.2 Hardware/NOS Requirements
• Ch.2 Installing the Network Interface Card
  • 2.1 Preparing the Printer
  • 2.2 Powering Up the Printer
  • 2.3 Connecting to a Network the NIC
• Ch.3 Utilizing Windows Programs
  • 3.1 Discovery Program - Management Access Program (MAP) -
    • 3.1.1 Installing the MAP
    • 3.1.2 Configuring the MAP
    • 3.1.3 Using the MAP
    • 3.1.4 IP Discovery Program
  • 3.2 IP Peer-to-Peer Printing Program
    • 3.2.1 Installing the IP Peer-to-Peer Printing Program
    • 3.2.2 Setting Up IP Peer-to-Peer Printing
    • 3.2.3 Adding Printers for IP Peer-to-Peer Printing
  • 3.3 IPX Peer-to-Peer Printing Program
    • 3.3.1 Installing the IPX Peer-to-Peer Printing Program
    • 3.3.2 Installing the Printer Driver and Setting the Printer Port
  • 3.4 Using a Web Browser
• Ch.4 NetWare Configuration
  • 4.1 Configuring NetWare 2.15 and 3.x
    • 4.1.1 Start PCONSOLE and Select File Server
    • 4.1.2 Create Print Queues
    • 4.1.3 Enter the Print Server Name
    • 4.1.4 Configure the Print Server
    • 4.1.5 Assign Print Queues to the Printer
    • 4.1.6 Set Up Notify Options for the Printer (Optional)
    • 4.1.7 Installing the Print Server on Multiple File Servers
    • 4.1.8 Primary File Server
    • 4.1.9 Preferred File Servers
  • 4.2 Configuring NetWare 4.x - Bindery Emulation
    • 4.2.1 Confirm Bindery Context
    • 4.2.2 Configure in Bindery Mode with PCONSOLE
  • 4.3 Configuring the NIC in Novell Directory Services
    • 4.3.1 Create Printer Object
    • 4.3.2 Create Print Server Object
    • 4.3.3 Create Print Queue Object
    • 4.3.4 Assign Printer Object
    • 4.3.5 Assign Print Server Object
    • 4.3.6 Check Assignments
    • 4.3.7 Set Up and Reset the Printer
  • 4.4 NIC Configuration
  • 4.5 Using the Novell PCONSOLE Utility
    • 4.5.1 Changing the File Server
    • 4.5.2 Changing Print Queues
    • 4.5.3 How to Set Up Notify
• Ch.5 AppleTalk Configuration
  • 5.1 Choosing the Printer
  • 5.2 Loading the AppleTalk NIManage Utility Program
  • 5.3 Configuring the NIC
    • 5.3.1 Configuration
    • 5.3.2 Error Log
    • 5.3.3 Protocol Setup
    • 5.3.4 Options
• Ch.6 TCP/IP Configuration
  • 6.1 Installation in a Windows Environment
    • 6.1.1 Setting up the NIC
    • 6.1.2 Assigning IP Address with arp & ping
    • 6.1.3 Assigning the IP Address with BOOTP
    • 6.1.4 Setting Up IP and lpr Parameters
    • 6.1.5 Creating an lpr Queue on the Workstation
  • 6.2 UNIX Printing
    • 6.2.1 Configuring the IP Address on the NIC
      • 6.2.1.1 Using BOOTP
      • 6.2.1.2 Using rarp
      • 6.2.1.3 Using arp & ping
    • 6.2.2 lpd Printing
      • 6.2.2.1 Setting Up a BSD Remote Printer to Use lpd
      • 6.2.2.2 Setting Up an AIX 2.5 Remote Printer to Use lpd
      • 6.2.2.3 Setting Up an AIX 4.0 System
      • 6.2.2.4 Setting Up an HP/UX Remote Printer to Use lpd
      • 6.2.2.5 Setting Up an AS/400 Systems to Use lpd
      • 6.2.2.6 Setting Up a DEC ULTRIX 4.3 RISC or OSF1/ ALPHA Remote Printer
      • 6.2.2.7 Setting Up a SCO UNIX Remote Printers to Use lpd
      • 6.2.2.8 Setting Up System V Rel.4 and Solaris 2.X to Use lpd
    • 6.2.3 Installing TCP/IP for NIC If Not Running lpd
      • 6.2.3.1 Loading the Software
      • 6.2.3.2 Script Selection of Filters
      • 6.2.3.3 Manual Selection of Filters
      • 6.2.3.4 Installing and Printing on Solaris 1.X and OSF1/ALPHA Systems
      • 6.2.3.5 Installing & Printing on an DEC ULTRIX 4.3 RISC System
      • 6.2.3.6 Installing and Printing on the HP/UX System
      • 6.2.3.7 Installing and Printing on a System V (Solaris 2.X)/System V Rel.4 386-based Machine
      • 6.2.3.8 Installing & Printing on a SCO UNIX System
      • 6.2.3.9 Installing and Printing on an AIX RISC System/6000
  • 6.3 Running Telnet
    • 6.3.1 Making Connection and Main Menu
    • 6.3.2 Configure IP Parameters
    • 6.3.3 Select Printer Languages
    • 6.3.4 Enable/Disable Network Protocols
    • 6.3.5 Reset Unit
    • 6.3.6 Restore Factory Defaults
    • 6.3.7 Change Password
    • 6.3.8 Exit Telnet
  • 6.4 FTP Printing
  • 6.5 Dynamic Host Configuration Protocol
• Ch.7 Operation and Troubleshooting
  • 7.1 LED Status Indicator
  • 7.2 Status/Configuration Report
  • 7.3 Resetting the NIC to Factory Default
  • 7.4 How to Diagnose Problems
  • 7.5 Troubleshooting Checklists
    • 7.5.1 Troubleshooting Network Hardware Connections
    • 7.5.2 Troubleshooting NetWare Protocol
      • 7.5.2.1 NetWare Checklist
      • 7.5.2.2 File Server Checklist
      • 7.5.2.3 Workstation Checklist
      • 7.5.2.4 NIC Configuration Checklist
      • 7.5.2.5 Printer Server/File Server/Printer Checklist
      • 7.5.2.6 Workstation to NIC Connection Checklist
      • 7.5.2.7 NIC Loses Its File Server Connection
      • 7.5.2.8 Unable to Print from a Different Context
    • 7.5.3 Troubleshooting AppleTalk Protocol
• App.A Jumper Settings
  • A.1 Network Interface Cards and Jumper Locations
  • A.2 Ethernet Jumpers
  • A.3 Reset to Factory
  • A.4 BUS Handshake
  • A.5 Network Bridging
• App.B Specifications
  • B.1 Network Interface Card
  • B.2 10/100BaseT/UTP Cables
• App.C Using a Web Browser
  • C.1 Accessing the HTTP Server Screens
    • C.1.1 Minolta PageScope™utility
    • C.1.2 Network Administration page
      • C.1.2.1Reset
      • C.1.2.2Factory Defaults
      • C.1.2.3Unit Status
      • C.1.2.4 Network Address
      • C.1.2.5Change Password
      • C.1.2.6Setup NetWare
      • C.1.2.7Setup TCP/IP
      • C.1.2.8Setup AppleTalk
      • C.1.2.9Test Printer
      • C.1.2.10Configure Status Page
      • C.1.2.11Printer Status
  • C.2 Supported Web Browsers
• App.D Index
  • A to I
  • J to N
  • O to T
  • U to Z