Motorola DVR530 - Manual (Page 29)

29
Live Programming Controls
Protecting and Deleting Recorded Programs
Recorded programs remain stored on the DVR530 until you choose to delete them.
After a recording has completed you can prevent accidental deletion of the program by
protecting it. Within the Recording Details screen for a recorded program, select “PROTECT”
and an icon will appear next to the program’s entry in the DVR List. The program cannot be
deleted individually or via the “DELETE ALL” option until you disable the protection. To do so,
access the Recording Details screen again and select “UNPROTECT”.
To erase your recorded programs, access the DVR List and select “DELETE ALL” to erase
all unprotected programs. To erase programs individually, the Recording Details screen for
any unprotected program and select “DELETE” to immediately erase the program. Once a
program is deleted, it cannot be recovered.
Enhanced Live TV Viewing
While full playback control is only possible on pre-recorded programs, the DVR530 offers
several enhanced options for use while viewing live broadcasts. NOTE: These features
require the “Live Record to Disk” feature to be enabled. This feature is enabled
by default, see page 18 for details.
Pausing Live Programs
Press the pause button on the remote control at any time to pause the program you are
viewing. The image will freeze and a pause icon will appear in the lower right corner of the
screen. A timer next to the pause icon will display the time elapsed since the program was
paused. Press the play button on the remote control to resume playback at any time within
90 minutes of pausing.