Part c: associating pc port with usb driver – Multi-Tech Systems MTCBA-G-UF1 User Manual
Page 19
Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide
19
Part C: Associating PC Port with USB Driver
8. Wait while Windows prepares the next phase of the installation (associating the PC port with
the USB drive). The Welcome to the Found New Hardware Wizard screen will appear with
the Texas Instruments UMP Serial Port as the device to be installed. This is the beginning
of the “Found New Hardware” sequence for the port.
Click Install from a list or specific location (Advanced).
Click Next.
9. Please choose your search and installation options screen appears.
Ensure that Search for the best driver in these locations is set and click on Search
removable media (floppy, CR-ROM…).
Click Next.
10. A second ‘Windows Logo Testing’ screen appears. This screen pertains to the MTS GSM
USB – Serial Port.
Click Continue Anyway.
11. The Completing the Found New Hardware Wizard screen appears.
The association between the serial port and the USB driver has been made.
Click Finish.
The third Found New Hardware wizard will start automatically to install the modem inf file.