Part c: associating pc port with usb driver – Multi-Tech Systems MTCBA-G-UF1 User Manual
Page 24
Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide
24
Part C: Associating PC Port with USB Driver
11. Wait while Windows prepares the next phase of the installation (associating the PC port with
the USB drive). When the Welcome to the Found New Hardware Wizard screen appears,
click Next.
12. The Install Hardware Device Drivers screen appears referring to the Texas Instrument
UMP Serial Port device. This is the beginning of the “Found New Hardware” sequence for the
port.
Click
on
Search for a sutiable driver for my device (recommended).
Click
Next.
13. The Locate Drivers Files screen appears, ensure that CD-ROM drives is the only option
checked.
Click
Next.
14. Driver Files Search Results screen appears with the Texas Instruments UMP Serial Port
device listed with the location of the driver.
Click Next.
15. The Completing the Found New Hardware Wizard screen appears. The association
between the serial port and the USB driver has been made.
Click Finish.
The third Found New Hardware Wizard will start automatically to install the modem inf file.