Manitowoc Ice Q290 User Manual
Page 33
Advertising
Section 5
Component Parts – Removal & Replacement
Gearmotor Shaft Seal Replacement (continued)
8
Press the bin insulator plate back into place.
9
Replace the three bolts. Using a 7/16” nut driver,
tighten a quarter turn past tight.
10
Replace the paddle wheel, agitator and paddle
wheel pin in the dispenser.
11
Refill the dispenser or restart the ice machine.
12
Restore power to the dispenser and ice
machine.
5-3
Advertising
This manual is related to the following products: