Removal of the gearmotor – Manitowoc Ice Q290 User Manual
Page 29
Advertising
4-9
Section 4
Maintenance
Removal of the Gearmotor
WARNING
Unplug unit before servicing or cleaning.
Electric Shock Hazard.
1
Remove the front panel from dispenser. (See
pages 4-1 and 4-2.)
2
Remove paddle wheel pin, agitator, and paddle
wheel. (See pages 4-5 and 4-6.)
3
Unplug the gearmotor wire.
4
Turn the two removal pins toward you as shown
in photo.
5
Pull removal pins out to the right.
6
As soon as the second pin is removed, be sure to
hold onto the gearmotor as it slides forward.
Then place the gearmotor aside.
Gearmotor
wire
Removal
pins
Advertising
This manual is related to the following products: