Maxon Telecom SP210 - Manual (Page 49)

SP200/210 Maxon SP200/210 Radio
Issue 1.0 PROGRAMMING
03/01 Page 7-3
Having pressed <enter>, the following sub-
window is displayed:
If you wish to assign some text to the file (i.e.
a description of the data type etc.), type it now
and press <enter>
The following screen prompt is then displayed
at the bottom of the screen:
This function will allow you to recall a data file
by serial number alone at a later date.
Having typed the serial number (or <enter> if
you do not wish to use this facility), the
Program/Print/Save Menu is redisplayed with
option 1 now reading “Program another with
same data”.
If you wish to program another radio with the
same data, select option 1. Otherwise, press
<enter> to return to the Select Features Menu.
Print Data
This option produces a print-out of the
Personality Programmer data.
The following screen prompt is displayed:
If you wish to use this facility, type Y
Save Data to Disk
This option saves the current data to a file. On
selection of option 3, a filename window is
then displayed together with the following
screen prompt:
If you wish to save this data to another
filename, type an eight character filename and
press <enter>.
Enter record information if desired <CR> to end
Type a serial number if you want to retrieve this
data by serial no.
Enter Radio Serial No.
Y for Yes will cause a form feed to move
paper to top of page
Type a filename to save this data or <CR> to
use the name shown.