MITSUBISHI ELECTRIC X50 - Manual (Page 15)

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal board using the suit-
able implement
• If the COMPUTER or VIDEO button is pressed, the
MENU selection bar or MENU will disappear.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
IMAGE
XGA60
INSTALLATION
Opt XGA60
IMAGE REVERSE
INSTALLATION
OFF
KEYSTONE 0 °
AUTO POWER ON OFF
AUTO POWER OFF OFF
Opt XGA60
KEYSTONE 0 °
AUTO POWER ON OFF
AUTO POWER OFF OFF
KEYSTONE 0 °
AUTO POWER ON OFF
AUTO POWER OFF 30 min
IMAGE CONTRAST ± 30
BRIGHTNESS ± 30
1 COLOR MATRIX
SHARPNESS ± 10
TINT
±
10
COLOR ± 10
RED ± 10
YELLOW
±
10
BLUE ± 10
GREEN
±
10
CYAN ± 10
MAGENTA
(Displays only when the source is selected to VIDEO)
(For LVP-X70U)
(1 - 2 : For LVP-X50U)
(For LVP-X70U only)
(Displays only when the source is selected to VIDEO)
(AUTO : When the source is selected to COMPUTER)
± 10
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R
±
30
BRIGHTNESS B ± 30
EXPAND MODE 1 - 4
1=Upper left, 2=Lower right
FRAME POSITION 1 - 5
INSTALLATION IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
KEYSTONE
±
15˚
AUTO POWER ON ON, OFF
AUTO POWER OFF
1 - 3
ON, OFF
FEATURES MENU POSITION
OFF, 5, 10, 15, 30, 60 min
VIDEO SIGNAL
AUDIO MODE
ANAMORPHIC
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - +63
CLAMP WIDTH 0 - +63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
PLL AUTO, 0 - 7
SHUTTER (L) 0 - 383
SHUTTER (U) 0 - 383
VERT. SYNC AUTO, ON, OFF
2
3
USER
USER
OFF
STANDARD
HIGH
LOW
COLOR TEMP.
USER
MEMORIZE
*
*
*
HOLD AUTO
USER1, USER2
DELETE USER1, USER2
DEFAULT
ON BEGIN -1 - -99
END 1 - 99 OFF
COMPUTER INPUT RGB, YC B C R / YP B P R
*
*
*
*
* : Setting range is different
according to the type of
the signal.
, English, Español, Deutsch, Français, Italiano,